PX3 portable X-ray inspection system operation tips 2

PX3 portable X-ray inspection system operation tips 2
Q:
 Sometimes we encounter slow image capturing under wireless control mode, after the generator finishes capturing, it will take longer time to wait for the captured image to appear on the computer screen.
 A:
 The PX3's wireless communication mode is based on 2.4G WiFi, susceptible to interference from other devices and electromagnetic signals in the environment. If too many devices use WiFi or the electromagnetic signal environment is poor, the communication frequency band may become congested, resulting in reduced data transmission speed for the PX3 and longer image transmission times.
                                                                                                                                  
Q:
Can I charge the PX3 image panel using the Type-C connector?
 A: 
Yes, you can, but the Type-C charging mode is slower than the battery charger and you will have to wait longer.
                                                                                                                                   
Q: 
What do "WW" and "WC" mean in the control software menu?
 A: 
"WW" and "WC" are the image filter setting parameters. WW" means "window width" and "WC" means "window center" to adjust the position of the filter. 
PX3 uses 16-bit dynamic range, which could give you a 65536 greyscale. Sometimes the image could give you the best contrast in a certain greyscale range. Using "WW" and "WC" could select the best greyscale range and the best position of the filter. A clever combination of WW and WC can optimize images, improve contrast, and let you understand the inner structure of the target object more clearly.

Leave a comment

Please note, comments must be approved before they are published

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.